Bosch Appliances Home Security System DINION 4000 AN User Manual

Camera Menus  
DINION 4000 AN  
en Quick Operation Guide  
 
Analog Camera Menus  
Setup menu | en  
3
1
Setup menu  
Press the center button of the control pad to access the SETUP  
menu.  
Set  
Menu  
Press the up or down buttons to move the cursor through  
the menus.  
Press the right or left buttons to change values.  
When the symbol  
is shown, press the center button to  
select an item or open a submenu.  
Navigation items at the bottom of the screen  
To move to the continuation of a menu, select NEXT.  
To return to the previous menu, select BACK or RETURN.  
To save changes, select SAVE ALL.  
To close the SETUP menu, select EXIT.  
Bosch Security Systems  
Quick Operation Manual  
AM18-Q0636 | v1.0 | 2013.01  
 
4
en | Setup menu  
Analog Camera Menus  
1.1  
Main menu  
LENS  
Iris setting  
SHUTTER/AGC  
WHITE BAL  
BACKLIGHT  
PICT ADJUST  
DYN  
Auto and manual exposure control  
White balance setting  
Backlight compensation setting  
Image adjustment setting  
Dynamic range setting  
MOTION DET  
PRIVACY  
Video motion detection setting  
Privacy masking setting  
Day/Night setting  
DAY/NIGHT  
DNR  
Digital noise reduction  
CAMERA ID  
SYNC  
Camera identification  
Synchronization mode setting  
Language setting  
LANGUAGE  
CAMERA RESET  
SAVE ALL  
Restores all factory default values  
Saves all settings  
1.1.1  
Lens menu  
LENS  
MANUAL  
AUTO  
TYPE  
DC  
MODE  
SPEED  
RETURN  
OPEN, CLOSE, AUTO  
0 - 255  
AM18-Q0636 | v1.0 | 2013.01  
Quick Operation Manual  
Bosch Security Systems  
 
Analog Camera Menus  
Setup menu | en  
5
1.1.2  
Shutter/AGC (Automatic Gain Control) menu  
SHUTTER/AGC AUTO  
HIGH LUMINANCE  
MODE  
SHUT+AUTO IRIS, AUTO  
IRIS  
BRIGHTNESS  
RETURN  
0 - 255  
LOW LUMINANCE  
MODE  
AGC, OFF  
BRIGHTNESS  
RETURN  
x0.25, x0.5, x0.75, x1.0  
MANUAL MODE  
SHUT+AGC  
SHUTTER  
1/60, 1/120, 1/250, 1/500,  
1/1000, /2000, 1/4000,  
1/10000 (NTSC)  
1/50, 1/100, 1/250, 1/500,  
1/1000, 1/2000, 1/4000,  
1/10000 (PAL)  
AGC  
6, 12, 18, 24, 30, 36, 42,  
44.8  
RETURN  
Bosch Security Systems  
Quick Operation Manual  
AM18-Q0636 | v1.0 | 2013.01  
 
6
en | Setup menu  
Analog Camera Menus  
1.1.3  
White balance menu  
WHITE BAL  
ATW  
SPEED  
0 - 255  
0 - 255  
DELAY CNT  
ATW FRAME  
ENVIRONMENT  
RETURN  
x0.5, x1.0, x1.5, x2.0  
INDOOR, OUTDOOR  
PUSH  
USER1  
B-GAIN  
R-GAIN  
RETURN  
0 - 255  
0 - 255  
USER2  
B-GAIN  
R-GAIN  
RETURN  
0 - 255  
0 - 255  
ANTI CR  
MANUAL LEVEL  
RETURN  
0 - 255  
PUSH  
LOCK  
ATW (Auto Tracking White balance) and PUSH (Full pull-in:  
1,800 K to 10,500 K) continuously analyze color  
temperature.  
Use ANTI CR (Anti Color Rolling) when certain types of  
fluorescent light cause the picture to periodically change  
color.  
Use PUSH LOCK with a reference white object filling the  
screen.  
AM18-Q0636 | v1.0 | 2013.01  
Quick Operation Manual  
Bosch Security Systems  
 
Analog Camera Menus  
Setup menu | en  
7
1.1.4  
Backlight menu  
BACKLIGHT  
OFF  
BLC  
HLC  
Use BLC (Back Light Compensation) to see a dark object in  
front of a bright background.  
Use HLC (High Light Compensation) to darken highlights  
and avoid image wash-out (for example, car headlights).  
1.1.5  
Picture adjust menu  
PICT ADJUST  
MIRROR  
BRIGHTNESS  
CONTRAST  
SHARPNESS  
HUE  
ON, OFF  
0 - 255  
0 - 255  
0 - 255  
0 - 255  
0- 255  
GAIN  
RETURN  
1.1.6  
Dynamic range setting menu  
DYN  
OFF  
ON  
LUMINANCE  
CONTRAST  
LOW, MID, HIGH  
LOW, MIDLOW, MID,  
MIDHIGH, HIGH  
RETURN  
Use DYN (Dynamic range setting) to improve dynamic  
range by highlight compression and contrast  
enhancement.  
Bosch Security Systems  
Quick Operation Manual  
AM18-Q0636 | v1.0 | 2013.01  
 
8
en | Setup menu  
Analog Camera Menus  
1.1.7  
Motion detection menu  
MOTION DET  
OFF  
ON  
DETECT SENSE  
BLOCK DISP  
MONITOR AREA  
AREA SEL  
TOP  
0 - 127  
OFF, ON, ENABLE  
OFF, ON  
1 - 4  
0 - 244 (NTSC), 288 (PAL)  
0 - 244 (NTSC), 288 (PAL)  
0 - 474 (NTSC), 468 (PAL)  
0 - 474 (NTSC), 468 (PAL)  
BOTTOM  
LEFT  
RIGHT  
RETURN  
The ENABLE function sets the regions/blocks where  
motion detection does not work.  
To exit the BLOCK DISP ENABLE function, press straight  
down on the set button for a longer time.  
1.1.8  
Privacy masking menu  
PRIVACY  
OFF  
ON  
AREA SEL  
TOP  
1 - 8  
0 - 244 (NTSC), 288 (PAL)  
0 - 244 (NTSC), 288 (PAL)  
0 - 474 (NTSC), 468 (PAL)  
0 - 474 (NTSC), 468 (PAL)  
1 - 8  
BOTTOM  
LEFT  
RIGHT  
COLOR  
TRANSP  
MOSAIC  
RETURN  
0.00, 0.50, 0.75, 1.00  
OFF, ON  
Only 4 areas are available if MONITOR AREA of motion  
detection is on.  
AM18-Q0636 | v1.0 | 2013.01  
Quick Operation Manual  
Bosch Security Systems  
 
Analog Camera Menus  
Setup menu | en  
9
Area selection for motion or privacy masks  
Select area 1, 2, 3 or 4 (8).  
Top: extend or reduce upper limit of the detection area.  
Bottom: extend or reduce bottom limit of the detection  
area.  
Left: extend or reduce left limit of the detection area.  
Right: extend or reduce right limit of the detection area.  
TOP  
reduce RIGHT  
extend  
LEFT  
RIGHT  
1
1
BOTTOM  
1.1.9  
Day/night menu  
DAY/NIGHT  
AUTO  
BURST  
OFF, ON  
DELAY CNT  
DAY->NIGHT  
NIGHT->DAY  
RETURN  
0 - 255  
0 - 255  
0 - 255  
COLOR  
B/W  
BURST  
OFF, ON  
EXT  
OFF, EXT1, EXT2  
RETURN  
When EXT is on the IR cut-off filter is switched by an  
external input.  
With EXT1 the camera switches to night mode when alarm-  
in is high; with EXT2 the camera switches to night mode  
when alarm-in is low.  
The output relay closes when the camera switches to  
NIGHT mode.  
Bosch Security Systems  
Quick Operation Manual  
AM18-Q0636 | v1.0 | 2013.01  
 
10 en | Setup menu  
Analog Camera Menus  
1.1.10  
Digital noise reduction menu  
DNR  
DNR MODE  
Y LEVEL  
OFF, Y, C, Y/C  
0 - 15  
0 - 15  
C LEVEL  
RETURN  
1.1.11  
Camera identification menu  
CAMERA ID  
OFF  
ON  
RETURN  
When ON is selected, a virtual keyboard appears on the screen.  
Use the control pad to move to the character you want and  
select it. Repeat this to enter the camera ID you desire. You can  
enter up to 52 characters.  
1.1.12  
Synchronization menu  
SYNC.  
INT  
LL  
PHASE  
0 - 524 (624)  
RETURN  
Line-Lock (LL) is only available for cameras with a VAC power  
supply.  
1.1.13  
Language menu  
LANGUAGE  
ENGLISH, JAPANESE, GERMAN, FRENCH, RUSSIAN,  
PORTUGUESE, SPANISH, SIMPLIFIED CHINESE  
AM18-Q0636 | v1.0 | 2013.01  
Quick Operation Manual  
Bosch Security Systems  
 
 
Bosch Security Systems  
© Bosch Security Systems, 2013  
 

Blackberry Water System 600 User Manual
Black Decker Laser Level BDL190S User Manual
Bosch Power Tools Washer WVT 52458 User Manual
Bravetti Rice Cooker KC255H User Manual
Brother Sewing Machine HE 240 User Manual
Canon Digital Camera 5260B002 User Manual
Carrier Humidifier HUMCCLBP2018 User Manual
Casio Clock TMR 200 User Manual
Casio Digital Camera QV R61 User Manual
Christie Digital Systems Projector 38 VIV302 01 User Manual