Cisco Systems IP Phone WIP310 User Manual

QUICK INSTALLATION GUIDE  
Wireless-G IP  
Phone  
Model: WIP310  
Package Contents  
Handset  
Phone Charger  
Power Adapter  
Li-ion Battery  
USB Cable  
Quick Installation Guide  
Read Me First Card  
 
2 Configuration  
Handset Navigation Pad  
To navigate through the phone  
menus, use the Navigation Pad. The  
select button is the silver button in  
the middle of the navigation pad.  
Navigation Pad  
The arrows are used to move up,  
down, left and right through the  
phone menus.  
The Wireless-G IP Phone requires that you have phone service through a  
VoIP provider to make phone calls. In order to use your phone’s VoIP service,  
you must first connect your Wireless-G IP Phone to a wireless network  
which has internet access.  
When you power on the phone for the first time, you will see that the phone  
is not configured to connect to a network. To connect your phone to your  
wireless network, you must first configure the phone by setting up a Wi-Fi  
Profile. There are two ways to configure the Wi-Fi Profile: Automatically via  
Wi-Fi Protected Setup and Manually.  
NOTE: The handset should be within 300 feet (90 m) of the  
Network to connect.  
 
Automatic Configuration via Wi-Fi Protected Setup  
To automatically set up a secure wireless connection to your router, use  
Wi-Fi Protected Setup. Your router must support this feature to use this  
method.  
NOTE: Look for the Wi-Fi Protected Setup  
button on your router. If you are not sure  
that your router supports this feature,  
consult your User Guide.  
Wi-Fi Protected Setup  
button  
A. Press the Power/End Call  
button to power on the phone.  
Power/End Call button  
B. When the standby screen  
displays, press the select button  
to display the Settings menu.  
Navigate to the Wireless Setup  
menu and press the select  
button to view your options.  
Settings  
C. To automatically configure  
your profile, highlight Use Wi-Fi  
Protected Setup and press the  
select button.  
Wireless Setup  
D. For the easiest way to connect  
to your network, highlight  
Connect easily by pushing a  
button and press the select  
button.*  
Connect Automatically  
 
E. Follow the phone’s onscreen  
instructions to connect your  
phone to your network using  
Wi-Fi Protected Setup.  
Wi-Fi Protected Setup Instructions  
F. The phone will display a message if the connection is successful.  
NOTE: If the connection is successful, the phone will create a  
Wi-Fi Profile automatically. To view, edit, or manage your Wi-Fi  
Profiles, see the section below, Manual Configuration.  
Manual Configuration  
Use this method to connect to your network if your router does not support  
the Wi-Fi Protected Setup feature.  
A. Press the Power/End Call  
button to power on the phone.  
Power/End Call button  
B. When the standby screen  
displays, press the select button  
to display the Settings menu.  
Navigate to the Wi-Fi Setup  
menu and press the select  
button to view your options.  
Settings  
C. Select Manual Setup to manually  
configure a Wi-Fi Profile.  
Manual Setup  
 
D. You will see the Wi-Fi Profiles  
screen list. The list will be empty  
when configuring your phone  
for the first time. To search for  
the available networks, press  
the left soft key Options, then  
highlight Scan Networks. Press  
the select button.  
Wi-Fi Profiles  
E. A list of available networks will  
display. Highlight a network  
and press the select button.  
Available Networks  
F. Follow the phone’s onscreen instructions to connect your phone to  
your network.  
G. The phone will display whether the connection is successful. The  
network name will appear in the Wi-Fi Profile screen list.  
NOTE: If your network is hidden, it will not appear in the list of available  
networks. You can manually create a new Wi-Fi Profile by selecting New  
Profile. You will be required to enter your network’s information:  
Auto Connect (turn ON for the phone to use this profile)  
Profile Name (the name you will call these network settings)  
SSID (the network name that you want to connect to)  
Wi-Fi Security (None, WEP, or WPA/WPA2 Personal)  
* Another method of automatically connecting your phone to your nework is by  
using the Wi-Fi Protected Setup PIN method. See your User Guide for more detailed  
information regarding this procedure.  
 
IMPORTANT SAFETY INSTRUCTIONS  
BEFORE USING YOUR TELEPHONE EQUIPMENT, BASIC SAFETY PRECAUTIONS SHOULD  
ALWAYS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY,  
INCLUDING THE FOLLOWING.  
This device for indoor use only!  
Read and follow all warnings and instructions marked on the product.  
Do not use this product near water, laundry tub, in a wet basement, or  
near a swimming pool.  
Do not place this product on an unstable table. The product may fall and  
be damaged.  
This product should never be placed near or over a radiator or heat  
register.  
This product should be operated only from the type of power source  
indicated on the label.  
Do not allow anything to rest on the power cord. Do not locate this  
product where the cord will be abused by persons walking on it.  
Avoid using a telephone during an electrical storm. There may be a  
remote risk of electric shock from lightning.  
Do not use this product to report a gas leak in the vicinity of the leak.  
Do not use this product near intensive care medical equipment or by  
persons with pacemakers.  
BATTERIES  
Use only the battery type listed in the instruction manual. Do not use  
lithium batteries or non-rechargeable batteries that may damage the  
handset and charger.  
Do not dispose of the battery in a fire, as they can explode.  
Do not open or mutilate the battery. Released electrolyte is corrosive and  
can cause damage to the eyes or skin. It can be toxic if swallowed.  
 
Avoid contact with metal objects when handling the battery. These  
objects could short out the batteries or cause the conductor to overheat  
resulting in burns.  
Do not attempt to recharge the battery cell by heating it. Sudden release  
of battery electrolyte can cause burns or irritation to the eyes or skin.  
Observe the proper polarity, or direction, of any battery. Reverse insertion  
of the battery cell can result in leakage or explosion.  
Remove the battery cells if you do not plan to use the product for several  
months at a time.  
Discard any “dead” batteries because they are likely to leak into the  
product.  
Do not store this product or the battery in a high temperature area.  
Battery stored in a freezer or refrigerator should be protected from  
condensation during storage and defrosting. Battery should be stabilized  
at room temperature before using.  
Your battery is rechargeable and can be recycled once it outlives its  
usefulness. Depending upon your local and state law, it might be illegal  
to dispose of this battery into a municipal waste system. Check with your  
local solid waste company for more information on your recycling options  
for the battery cells.  
SAVE THESE INSTRUCTIONS  
Americas Headquarters  
Cisco Systems, Inc.  
170 West Tasman Drive  
San Jose, CA 95134-1706  
USA  
For additional information or troubleshooting help, please contact your  
Service Provider or visit the WIP310 website at www.linksys.com/wip310.  
CCDE, CCENT, Cisco Eos, Cisco Lumin, Cisco Nexus, Cisco StadiumVision, Cisco TelePresence, the Cisco logo, DCE, and  
Welcome to the Human Network are trademarks; Changing the Way We Work, Live, Play, and Learn and Cisco Store are  
service marks; and Access Registrar, Aironet, AsyncOS, Bringing the Meeting To You, Catalyst, CCDA, CCDP, CCIE, CCIP, CCNA,  
CCNP, CCSP, CCVP, Cisco, the Cisco Certified Internetwork Expert logo, Cisco IOS, Cisco Press, Cisco Systems, Cisco Systems  
Capital, the Cisco Systems logo, Cisco Unity, Collaboration Without Limitation, EtherFast, EtherSwitch, Event Center, Fast  
Step, Follow Me Browsing, FormShare, GigaDrive, HomeLink, Internet Quotient, IOS, iPhone, iQ Expertise, the iQ logo, iQ Net  
Readiness Scorecard, iQuick Study, IronPort, the IronPort logo, LightStream, Linksys, MediaTone, MeetingPlace, MeetingPlace  
Chime Sound, MGX, Networkers, Networking Academy, Network Registrar, PCNow, PIX, PowerPanels, ProConnect,  
ScriptShare, SenderBase, SMARTnet, Spectrum Expert, StackWise, The Fastest Way to Increase Your Internet Quotient,  
TransPath, WebEx, and the WebEx logo are registered trademarks of Cisco Systems, Inc. and/or its affiliates in the United  
States and certain other countries.  
All other trademarks mentioned in this document or Website are the property of their respective owners. The use of the word  
partner does not imply a partnership relationship between Cisco and any other company. (0807R)  
 

Black Box Switch ACU5010A User Manual
Bodum Charcoal Grill 11344 User Manual
Bosch Power Tools Drill GBH 24 VFR User Manual
Bosch Power Tools Impact Driver 22612 User Manual
Bose Headphones 3 User Manual
Cateye Bicycle Accessories CC CD200N User Manual
Char Broil Gas Grill 466250511 User Manual
Chauvet Cassette Player LXW User Manual
Chicago Electric Vacuum Cleaner 94282 User Manual
Chief Manufacturing Indoor Furnishings KTP Series User Manual